GW Instek GSP-9300 - Page 69

BASIC OPERATION
67
Operation
1. Press
BW/Avg
> RBW[F1] and set the RBW to
Auto or Man.
2. Set the resolution bandwidth and unit for Man
mode.
Mode:
Frequency Range(3dB):
Frequency Range(6dB):
Auto, Man
1Hz~1MHz (1-3-10 step)
200Hz, 9kHz, 120kHz,
1MHz
Note
If the setting is in Auto mode, using the scroll
wheel or arrow keys will automatically set the RBW
to manual mode.
Display Icon
The BW icon is displayed at the bottom of
the screen when the RBW is in Man mode.
Note
If the RBW settings have an asterisk (*), it
indicates that the -6dB filters are used.