Even Parity Start Bit, and Length
If you select Even Parity, these items are available. If the even
parity start bit is 12, and the length is 12, then the system will
start even parity
calculaon from bit 12. It will calculate 12 bits.
The result will be in the last bit.
XOR Parity Start Bit, Length per Group, and Total Length
If you select XOR Parity, these items are available. Depending on
the table displayed above, the start bit is 0, the length per group
is 4, and the total length is 40. It means that the system will
calculate from bit 0, calculate every 4 bit, and calculate 40 bits in
total (10 groups in total). The result will be in the last 4 bits. (The
result length is the same as the length per group.)
Card ID Start Bit, Length, and Decimal Digit
If you use the transformaon rule, these items are available.
Depending on the table displayed above, the card ID start bit is 0,
the length is 32, and the decimal digit is 10. It represents that
from bit 0, there are 32 bits represent the card ID. (The length
here is calculated by bit.) And the decimal digit length is 10 bits.
Site Code Start Bit, Length, and Decimal Digit
If you use the transformaon rule, these items are available. For
detailed informaon, see the explanaon of the card ID.
OEM Start Bit, Length, and Decimal Digit
If you use the
transformaon rule, these items are available. For
detailed
informaon, see the explanaon of the card ID.
Manufacturer Code Start Bit, Length, and Decimal Digit
If you use the transformaon rule, these items are available.
Depending on the table displayed above, the manufacturer code
start bit is 32, length is 8, and decimal digit is 3. It represents that
from bit 32, there are 8 bits are manufacturer code. (The length
here is calculated by bit.) And the decimal length is 3.
114
To Next Page
Loading...
Need help?
General
