Device Description
16 SFP+ ports (10GE)
Bypass Module IOM-2SM-B
IOM-2SM-BE
4 LC-type optical ports
IOM-2MM-B
IOM-2MM-BE
4 LC-type optical ports
IOM-8MM-B-260 16 LC-type optical ports
SSM
QSM
SWM
No ports
Console Port
SG-6000 X series and its supported modules provide RS-232C asynchronous serial console ports
for you to configure the device. The description of console port attributes is listed below.
Table 2-47
Table: Console Port Attributes
Attribute Description
Connector
Type
RJ-45
Port Standard RS
Baud Rate SG-6000-X8180 115200bit/s
SG-6000-
X10800/X9180/X7180/X6180/X6150
9600 bit/s
Services Connect the CON port to the serial port of a PC and run a ter-
minal emulation program on the PC to configure the device.
100
Preface
To Next Page
Loading...