Notes:
l Replace fan trays or air filters if fan trays fail or the air filter is clogged. For
more information, see Replacing a Fan Tray of SG-6000-10800.
l When the device is located at 4,000 meters or more in altitude, make sure the
air outlet on the side panel is not clogged.
Port Attributes
The ports available for expansion modules of the SG-6000-X10800 are the Console port, Aux-
iliary port, MGT port, HA port, USB port, Copper port, and optical ports.
For more information about ports, see Ports of the SG-6000 X Series.
SG-6000-X9180
Hillstone SG-6000-X9180 chassis is a standard 19-inch chassis that can be installed in a standard
cabinet/rack if the cabinet/rack can handle the total weight of all hardware components.
SG-6000-X9180 consists of 6 general expansion slots (for SSM, IOM, SIOM, or QSM modules),
two SWM expansion slots, and two SCM expansion slots.
SG-6000-X9180 requires at least one SCM, one SSM, one IOM, and one SWM or at least one
SCM, one SIOM, and one SWM to function normally. In addition, to function normally, SG-
6000-X9180 requires at least two fan trays and two (in the country or region where the standard
voltage is 110V, at least three) 220V AC power modules or two -48V DC power modules.
SG-6000-X9180 supports the following expansion modules:
l SCM: SCM-280
l SSM: SSM-300
l QSM: QSM-300
l IOM: IOM-P100-300, IOM-P40-300
Preface 31
To Next Page
Loading...
Need help?
General