Hillstone SG-6000 X-Series - 100 GE(QSFP28) Transceiver Module

To Next Page

To Previous Page

numbers of 100GE(QSFP28) ports.

Table 2-59

Table: QSFP28 Port Attribute

Attribute Description

Connector

Type

QSFP28

Frame Format Ethernet_II

Ethernet_SNAP

Negotiation

Mode

With the 100GE(QSFP28)

transceiver module

100Gbps

With the 40GE(QSFP+) trans-

ceiver module

40Gbps

Notes:

l Make sure you use Hillstone transceiver modules for the optical ports on Hill-

stone devices.

l To avoid dust falling into the QSFP28 socket, you should place a rubber dust

cap (originally in the accessory box) over the QSFP28 port.

100GE(QSFP28) Transceiver Module

To connect devices via the QSFP28 transceiver module, use the optical fiber with the MPO/LC

type connector. SG-6000 X series supports two Hillstone 100GE(QSFP28) transceiver modules,

namely, TRAN-SR4-QSFP28, and TRAN-LR4-QSFP28。All transceiver modules are hot-swap-

pable.

Table: Specifications of the 100GE(QSFP28) Transceiver Module

Preface 113

Other manuals for Hillstone SG-6000 X-Series