Attribute Description
With the copper SFP mod-
ule
10/100/1000Mbps autosensing (some
devices only support 1000Mbps)
Full-duplex/Half-duplex
Notes:
l Make sure you use Hillstone transceiver modules for the optical ports on Hill-
stone devices.
l
To avoid dust falling into the SFP socket, you should place a rubber dust
cap (originally in the accessory box) over the SFP port.
1GE(SFP) Transceiver Module
To connect devices via the SFP transceiver module, use the optical fiber with the LC-type con-
nector. SG-6000 X series supports four Hillstone 1GE(SFP) transceiver modules, namely,
TRAN-SX, TRAN-LX10, TRAN-LX40, and TRAN-LX80. All transceiver modules are hot-swap-
pable.
Table 2-51
Table: Specifications of the 1GE(SFP) Transceiver Module
Model TRAN-SX
TRAN-
LX10
TRAN-LX40 TRAN-LX80
Form Factors SFP SFP SFP SFP
Interface Specification 1000Base-
SX
1000Base-
LX
1000Base-EX 1000Base-ZX
IEEE Standard IEEE 802.3-
2002 Clause
38
IEEE
802.3-2002
Clause 38
IEEE 802.3-
2002
IEEE 802.3-
2002
Preface 103
To Next Page
Loading...
Need help?
General