cap (originally in the accessory box) over the XFP port.
10GE(XFP) Transceiver Module
To connect devices via the 10GE(XFP) transceiver modules, use the optical fiber with the LC-
type connector. SG-6000 X series supports four Hilltone 10GE(XFP) transceiver modules:
TRAN-XFP-SR, TRAN-XFP-LX, TRAN-XFP-LX40, and TRAN-XFP-LX80. All transceiver
modules are hot-swappable.
Table 2-56
Table: Specifications of the XFP Transceiver Module
Model TRAN-XFP-SR TRAN-XFP-LR
TRAN-XFP-
LX40
TRAN-XFP-
LX80
Form Factors XFP XFP XFP XFP
Interface Spe-
cification
10GBase-SR 10GBase-LR 10GBase-ER 10GBase-ZR
IEEE Standard IEEE 802.3ae IEEE 802.3ae IEEE 802.3ae IEEE 802.3ae
Dara Rate 10Gbps 10Gbps 10Gbps 10Gbps
Connector Type LC LC LC LC
Fiber Mode
(SMF/MMF)
50/125μm
MMF
9/125μm
SMF
9/125μm
SMF
9/125μm
SMF
Max Transmission
Distance
0.3km 10km 40km 80km
Center
Wavelength
850nm 1310nm 1550nm 1550nm
Power dissipation <1.5W <1.5W <3.0W <3.5W
Preface 109
To Next Page
Loading...