EasyManuals Logo

Hillstone SG-6000 X-Series User Manual

Hillstone SG-6000 X-Series
233 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #64 background imageLoading...
Page #64 background image
LED Color/Status Description
Red/Always on The expansion module failed to boot or an expansion
module exception occurred.
Notes: LED indicators on different expansion modules vary. Please refer to the
actual expansion module.
Power Supply Module
SG-6000-X9180 supports the AC power module and DC power module. You can power the
device by installing AC or DC power modules as needed and then connecting them to the cor-
responding external power supply. You should install at least two (in the country or region where
the standard voltage is 110V, at least three) 220V AC or two -48V DC power modules to power
the device. Four power modules can be installed in the power expansion slots located on the back
panel of the SG-6000-X9180. In addition, power modules are hot-swappable.
Table 2-22
Table: Parameters of the SG-6000-X9180 Power Module
Power Module
Type
Input Voltage Range of
the External Power Sup-
ply
Maximum Output
Power of the AC
Power Module
Number of Power Mod-
ules Required for
Normal Device Run-
ning
AC Power Module In countries or regions
where the standard
voltage is 220V: 180 ~
264V AC
1600W At least 2
In countries or regions
where the standard
voltage is 110V: 90 ~
140V AC
800W At least 3
Preface 49

Table of Contents

Other manuals for Hillstone SG-6000 X-Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hillstone SG-6000 X-Series and is the answer not in the manual?

Hillstone SG-6000 X-Series Specifications

General IconGeneral
BrandHillstone
ModelSG-6000 X-Series
CategoryControl Unit
LanguageEnglish