Hillstone SG-6000 X-Series - Back Panel; Expansion Modules

Back Panel
Hillstone SG-6000-X8180 back panel consists of two power supply slots (PS0 and PS1), two
SWM slots (SWM0 and SWM1), four fan trays (FAN0-FAN3), and one grounding screw.
Figure 2-31 Fig: 3D Diagram of the SG-6000-X8180 Back Panel
Figure 2-32 Fig: Front View of the SG-6000-X8180 Back Panel
Expansion Modules
SG-6000-X8180 requires at least one SCM and one SIOM.
SG-6000-X8180 supports the following expansion modules:
l SCM: SCM-260, SCM-D1T-260, SCM-D2T-260
l SIOM: SIOM-P100-260 , SIOM-P100H-260
l Bypass Module: IOM-8MM-B-260
56
Preface