WebUI
The MGT port has a default IP address of 192.168.1.1/24, and all the management functions of
this port are enabled by default. Administrators can access the WebUI through the MGT port.
To log in the device's WebUI, take the following steps:
1. Set up the IP address of the management PC on the same subnet as 192.168.1.1/24. Con-
nect the management PC to the interface through an Ethernet cable.
l If the device has a MGT0 interface, connect the cable to this interface.
l If the device does not have a MGT0 interface, connect the cable to the e0/0 inter-
face.
2. Launch a Web browser of the management PC, enter the URL https://192.168.1.1 in the
address bar, and then press Enter.
3. Type the default administrator name (hillstone) and password (hillstone) into the text boxes
respectively.
4. At the first sign of address, you need to read and accept the EULA (End User License Agree-
ment). Click EULA to view the details of the EULA.
5. Click Login to enter the home page. After login, please change the default password of the
device in time. Then you can set other configurations to the device.
Telnet or SSH
You can also establish Telnet and SSH configuration environments. For more information, see
StoneOS CLI User Guide
.
Basic Configuration
Before beginning to use the device, you should be familiar with its features and your network
deployment. Different device positions in the network, network management demands and net-
Chapter 4 Boot and Configuration 184
To Next Page
Loading...
Need help?
General