Hillstone SG-6000 X-Series - Connecting the Ethernet Fiber Cable

l Be careful not to connect the Ethernet port to the wrong ports. Read the label above the port
carefully.
l For electrical Ethernet connection, use crossover cable or straight-through cable.
Connecting the Ethernet Fiber Cable
Follow the guidelines below when connecting cables to the ports:
l Be careful not to connect the Ethernet port to the wrong ports. Read the label above the port
carefully.
l For SFP port connection, the optical module should be inserted into SFP port before
installing the LC-type connector to the optical module; the copper SFP module should be con-
nected by crossover cable or straight-through cable.
175
Chapter 3 Installation