6. Take out the accessory box and EPE. Check the products received with the packing list.
7. Remove baffles and take the device from the base.
a. Use the cross screwdriver to remove the total ten screws on the vertical fixed
baffles (as shown by number 1) on both sides.
b. Use the spanner to remove the total eight screws on the horizontal fixed baffles (as
shown by number 2) on both sides.
c. Remove the baffles from the device, and then four people are required to take the
device from the base by handles on both sides.
127
Chapter 2 Installation Preparations
To Next Page
Loading...
Need help?
General