6.1 Viewing Instantaneous Data (VIEW Screen)
98
Voltage and current vectors are displayed. The rms voltages and phase
angles, and the rms currents and phase angles of the fundamental wave-
form are also displayed. The number of channels for which vectors are dis-
played depends on the selected wiring configuration.
Vector Display [VECTOR]
Select the screen.
To display ±180° lead
Displays -180° to -0° or 0° to 180° as positive
lead.
To display 360° lag
Displays 0° to 360° as positive lag.
The selected item is indicated by its "key-
pressed" appearance on the display. Press
another key to change the selection.
Thick lines indicate voltage vectors, and
thin lines indicate current vectors.
(p. 96)
Changing the phase angle display
method
0°
+120°
-120°
0°
120°
240
°
Rms voltages and
phase angles
Rms currents and
phase angles
To Next Page
Loading...
