7.1 Overview
127
7
This chapter describes the preparations to make before using the PC
application programs designed for this instrument. Refer to the instruc-
tions on the CD for details about program operation.
Communication between the instrument and a computer is available by
c
onnecting the supplied USB cable between them.
The supplied CD contains communication programs. The two applica-
tion programs for this instrument are called "3197 Communicator" and
"
3197 Data Viewer".
PC application program for Model 3197
Viewing Data on a
Computer
Chapter 7
7.1 Overview
3197
Computer
“3197 Communicator”
Operate the instrument re-
motely (observation, control
and saving screen image).
“3197 Communicator”
Transfer screen images and
measurement data from the
instrument's internal memory.
“3197 Data Viewer”
Analyze data recorded by the
instrument.
USB Cable
To Next Page
Loading...
