4.5 Changing Instrument System Settings [SYSTEM]
72
The instrument's version information can be viewed, and the display lan-
guage, beep sounds and screen colors can be changed from the SYS-
TEM screen.
Confirm that the clock is set correctly before starting recording. If the
cl
ock is not set correctly, recording results may not be analyzed cor-
rectly (p. 76).
Shows the instrument's version number.
4.5 Changing Instrument System Settings
[SYSTEM]
Press the key to display the [SYSTEM] screen.
Displays the instru-
ment's version infor-
mation.
Changes the display
language (p. 73).
Changes the wiring
configuration dia-
gram (p. 48).
Changes screen
colors (p. 73).
Enables or disables
the beep sound
(p. 74).
Sets the LCD back-
light timeout (p. 74).
Adjusts LCD contrast
(p. 75).
Opening the [SYSTEM] Screen
Sets the clock (p. 76).
Resets the system
(p. 77).
Select the displayed
terminal colors to
match the label colors.
Sets the clock (p. 49).
Displays the serial
No..
Displaying the Instrument's Version Number (Version)
To Next Page
Loading...
