Recording measurements at a
specified time
Starting and stopping
measurement by key presses
[RECORDING]
[RECORDING]
[WAITING]
Start Time Stop Time
Set the timers beforehand (p. 66)
Start recording
measurements
Stop recording
measurements
Analyze instaneous
measurement data
Select views of trends,
demand and energy con-
sumption.
Using remote control
Transfer data
Analysis can be performed during or after recording
Viewing data
anomalies
(when an event
occurs) (p. 31)
Viewing changes
over time
(time series data)
(p. 30)
Viewing instaneous
data (p. 29)
See the references for details
View on
a computer
Analyze data
(p. 127)
• Settings cannot be changed while recording. To change a setting, first press the
START/STOP key to stop measuring.
• When you press the
START/STOP key while recording, a confirmation message asks
whether you want to temporarily stop recording. Press the ENTER key to stop the
measurement.
• Enable the KEY LOCK function to avoid inadvertent key operations while record-
ing.(p. 51)
• To restart, press the DATA RESET key.
Verify detailed event wave-
forms, graphs and the num-
ber of occurrences.
Analyze recorded
measurement data
Analysis can be performed in the same way during
or after recording
USB
cable
Computer
3197
To Next Page
Loading...
