Hioki 3197 - Viewing Recorded Data ([REVIEW] State); Viewing Only Data Recorded in Memory Partition No. 1

6.4 Viewing Recorded Data ([REVIEW] State)
123
6
Data stored in internal memory when memory is partitioned [ON] can be
viewed and re-analyzed.
After recording data in the
[SET] state, switch to the [REVIEW] state to re-
analyze data. To select the [REVIEW] state, press the F4 (Re-Analyze) key
from the [TIME PLOT] or [EVENT] screen.
In the [REVIEW] state, [SYSTEM], [TIME PLOT] and [EVENT] data
r
ecorded in Memory No. 1 can be analyzed. ([VIEW] data cannot be ana-
lyzed.)
6.4 Viewing Recorded Data ([REVIEW] State)
Viewing Only Data Recorded in Memory Partition No. 1
From the TIME PLOT or EVENT screen,
select the
[SET] state.
Memory indicator:
Select the [REVIEW] state
The following message appears.
Reviewing
The [REVIEW] state is enabled.
Press the DATA RESET key to return to the
[SET] state.
Blue frame
Memory indicator:
Blue
Blue
Recorded data can be analyzed by selecting
the [SYSTEM], [TIME PLOT] and [EVENT]
screens.
Select the [SET] state
Exiting the [REVIEW] state and returning to
the
[SET] state.
The following message appears.
Memory indicator:
To exit from Reviewing