9.2 Cleaning
165
9
9.2 Cleaning
Cleaning the Instrument
• To clean the instrument and input modules, wipe it gently with a soft
cloth moistened with water or mild detergent. Never use solvents such
as benzene, alcohol, acetone, ether, ketones, thinners or gasoline, as
they can deform and discolor the case.
• Wipe the LCD gently with a soft, dry cloth.
Cleaning Clamp Sensors
• Measurements are degraded by dirt on the mating surfaces of the
clamp-on sensor, so keep the surfaces clean by gently wiping with a
soft cloth.
To Next Page
