Hioki 3197 - Turning the Power on and off

3.5 Turning the Power On and Off
46
3.5 Turning the Power On and Off
Before turning power on
Confirm that the instrument and related accessories are installed
and connected properly.
When using the AC adapter
Before turning the instrument on, make sure the supply voltage
matches that indicated on the its power connector. Connection to
an improper supply voltage may damage the instrument and
present an electrical hazard.
AC adapter rated supply voltage: 100 to 240 VAC
(Voltage fluctuations of ±10% from the rated supply voltage are
t
aken into account.)
Rated supply frequency: 50 or 60 Hz
Turning Power On
Left Side
Turn the power switch on ( | ).
The power indicators are dis-
played at the top right.
About the display indicators:
"2.4 Common Screen Ele-
ments" (p. 32)
• If the" " indicator is not displayed, the instrument is not being powered from the
AC line. In this state, the battery charge will be depleted if measuring for a long time,
and measurement may be interrupted. Verify that the AC adapter is securely con-
nected to an AC power source and to the instrument.
• About battery pack operating time:(p. 40)
The POWER LED
flashes green.
Startup Screen
(Self-Test)
(p. 47)