Hioki 3197 - Enable or Disable Beep Sounds (Beep); Setting the LCD Backlight Timeout (Backlight)

4.5 Changing Instrument System Settings [SYSTEM]
74
Keypress beep sounds can be enabled or disabled.
When operating from the battery pack only, operating time can be maxi-
m
ized by setting the LCD backlight to turn off automatically after a specified
period of key inactivity.
Enable or Disable Beep Sounds (Beep)
Move to the setting item.
Select the screen.
1
2
Setting Contents
ON Keypress beeps are enabled
OFF Keypress beeps are disabled.
Select from the pull-down
menu.
3
Accept
Cancel
Setting the LCD Backlight Timeout (Backlight)
Move to the setting item.
Select the screen.
1
2
Setting Contents
AlwaysOn Keeps the backlight always on.
1min/ 5min/ 10min/ 30min/ 1hour
The backlight turns off automatically after the se-
lected period of inactivity.
Select from the pull-down
menu.
3
Accept
Cancel
To turn the backlight back on
Press any key to turn the backlight back on after it has turned off automatically. The backlight
comes back on even if Key Lock is active.
The LCD backlight automatically switches from high to low brightness when there
is no key press for ten seconds. No setting is available to retain high brightness at
all times.