The 3197 Power Quality Analyzer is a measurement instrument designed to
detect power line anomalies and to analyze the power quality of power lines.
Power lines can be monitored and recorded for anomalies over long periods, and the causes
of anomalies can be analyzed by comparing measurements with particular standard charac-
teristics. In addition, utilizing remote computer control, abnormal events at a remote site can
be noticed as soon as they occur. Measurement data recorded in internal memory can be
transferred to a computer for analysis by PC application program for Model 3197.
Connect the instrument to the lines to be measured.
Power Quality Deterioration
Flickering light bulbs, short bulb life, malfunctioning office machines, intermittent device opera-
tion, overheating of equipment with capacitively compensated reactance, overloads, opposite-
and missing-phase relays sometimes occur.
Transfer data to a computer connected to the instrument by USB ca-
ble, and view measurement data using the supplied PC application
program for Model 3197 (p. 127).
Optional analytical application programs are also available for precise
data analysis.
Verify the vectors and wave-
forms of three-phase power
sources.
Three-phase voltage/
current waveform and
vector displays
Observe voltage
fluctuations of commercial
power and determine the oc-
currence of events.
Power quality measurement
Energy consumption and
demand measurement
Remote Control
The instrument can be remotely
controlled by a computer using
the supplied USB cable and
special-purpose PC application
programs.
Verify inrush current, such as
upon motor startup.
Inrush current measurement
Verify conditions of harmonic
power and distortion
Harmonic measurement
Capture images of
measurement conditions.
Display screens can be cap-
tured as BMP files (p. 52).
Data transfer and analysis
USB
Verify energy consumption
and load demand at distribu-
tion panels.
To Next Page
Loading...
