Safety Information
4
This manual contains information and warnings essential for safe opera-
tion of the instrument and for maintaining it in safe operating condition.
B
efore using it, be sure to carefully read the following safety precautions.
The following symbols in this manual indicate the relative importance of
ca
utions and warnings.
Safety Information
This instrument is designed to comply with IEC 61010 Safety Stan-
dards, and has been thoroughly tested for safety prior to ship-
ment. However, mishandling during use could result in injury or
deat
h, as well as damage to the instrument. However, using the
instrument in a way not described in this manual may negate the
provided safety features.
Be certain that you understand the instructions and precautions in
t
he manual before use. We disclaim any responsibility for acci-
dents or injuries not resulting directly from instrument defects.
Safety Symbols
In the manual, the symbol indicates particularly important infor-
mation that the user should read before using the instrument.
The symbol printed on the instrument indicates that the user
should refer to a corresponding topic in the manual (marked with the
symbol) before using the relevant function.
Indicates DC (Direct Current).
Indicates AC (Alternating Current).
Indicates a grounding terminal.
Indicates the ON side of the power switch.
Indicates the OFF side of the power switch.
Indicates that incorrect operation presents an extreme hazard
t
hat could result in serious injury or death to the user.
Indicates that incorrect operation presents a significant hazard
t
hat could result in serious injury or death to the user.
Indicates that incorrect operation presents a possibility of injury
to th
e user or damage to the instrument.
Indicates advisory items related to performance or correct
ope
ration of the instrument.
To Next Page
Loading...
Need help?
General
