Diagnostics > Status Configuration > Security Status
Diagnostics
428
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
User account
password Policy
Check deactivated
Activates/deactivates the monitoring of the "Policy Check" function.
Possible values:
marked
Monitoring is active.
The "Security Status" changes to "Error" if for at least 1 user account
the "Policy Check" function is inactive.
unmarked
(default setting)
Monitoring is inactive.
You activate the "Policy Check" function in the
Device Security > User
Management
dialog.
HTTP server active Activates/deactivates the monitoring of the HTTP server.
Possible values:
marked
(default setting)
Monitoring is active.
The "Security Status" changes to "Error" if you enable the HTTP
server.
unmarked
Monitoring is inactive.
You enable/disable the HTTP server in the
Device Security >
Management Access
> Server
dialog, "HTTP" tab.
SNMP unencrypted Activates/deactivates the monitoring of the SNMP server.
Possible values:
marked
(default setting)
Monitoring is active.
The "Security Status" changes to "Error" if at least one of the following
conditions applies:
– The "SNMPv1 enabled" function is enabled.
– The "SNMPv2 enabled" function is enabled.
– The encryption for SNMPv3 is disabled.
You enable the encryption in the
Device Security > User
Management
dialog, in the "SNMP Encryption Type" field.
unmarked
Monitoring is inactive.
You specify the settings for the SNMP agent in the
Device Security >
Management Access
> Server
dialog, "SNMP" tab.
Parameters Meaning
To Next Page
Loading...