Hitachi CB 520H B3 - Page 386

No. Server model
# of CNA
1
# of CTRL
2
Controller #
1 GGAGC0An-
or GGAGB0An-
without LOM
1 2 #0, #1 for the
mezzanine
2 2 3 #0, #1 for Mezz#1
#2, #3 for Mezz#2
3 GGAGC0Bn-
with LOM
0 1
#0 for LOM
3
1 3
#0 for LOM
3
#1, #2 for the
mezzanine
4 GGAGD0An-
without LOM
1 2 #0, #1 for the
mezzanine
5 2 4 #0, #1 for first
mezzanine #
#2, #3 for second
mezzanine #
6 3 6 #0, #1 for first
mezzanine #
#2, #3 for second
mezzanine #
#4, #5 for third
mezzanine #
7 4 8 #0, #1 for Mezz #1
#2, #3 for Mezz #2
#4, #5 for Mezz #3
#6, #7 for Mezz #4
8 GGAGD0Bn-
with LOM
0 2
#0, #1 for LOMs
4
1 4
#0, #1 for LOMs
4
#2, #3 for the
mezzanine
9 2 6
#0, #1 for LOMs
4
#2, #3 for Mezz #2
#4, #5 for Mezz #4
Notes:
1. The # of CNA indicates the total number of installed Emulex 10Gb CNA
mezzanine card and LAN mezzanine card.
2. Confirm that the indicated number of controllers in Controller Selection Menu
window is equal to the # of Controller indicated in this table for the replaced
server configuration.
3. The controller #0 for is assigned to LOM for CB 520H B1/B2 (GGAGC0Bn- with
LOM).
7-92
Configuring Emulex mezzanine card
Hitachi Compute Blade 500 Series System Service Manual