8 - 12
The operation of each type of stripping is defined below:
Leading
This strips the number of characters specified from the beginning of the collected data (not including Code ID).
The data is stripped unconditionally. This action is disabled by default.
Trailing
This strips the number of characters specified from the end of the collected data (not including Code ID). The data
is stripped unconditionally. This action is disabled by default.
Code ID
Strips the Code ID based on the type code ID specified in the Enable Code ID field in the Data Options tab. By
default, Code ID stripping is enabled for every symbology (meaning code IDs will be stripped, unless specifically
configured otherwise).
Bar Code Data Match List
The Barcode Data Panel is used to strip data that matches the entry in the Match list from the bar code. Enter the data
to be stripped in the text box and tap the Insert or Add button. The entry is added to the Match list.
To remove an entry from the Match list, highlight the entry in the list and tap the Remove button.
Tap ok to store any additions, deletions or changes.
Bar Code Data Match Edit Buttons
Add
Entering data into the text entry box enables the Add button. Tap the Add button and the data is added to the
next empty location in the Custom ID list.
Insert
Tap on an empty line in the Custom ID list. The Add button changes to Insert. Enter data into both the Name
and ID Code fields and tap the Insert button. The data is added to the selected line in the Custom IDs list.
Edit
Double tap on the item to edit. Its values are copied to the text boxes for editing. The Add button changes to
Replace. When Replace is tapped, the values for the current item in the list are updated.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
