11 - 8
Profile
Note: Tap the Commit button to save changes before leaving this panel or the SCU. If the panel is exited before tapping
the Commit button, changes are not saved!
When logged in as an Admin, see Admin Login (page 11-6), use the Profile tab to manage profiles. When not logged in as
an Admin, the parameters can be viewed, and cannot be changed. The buttons on this tab are dimmed if the user is not
logged in as Admin. The Profile tab was previously labeled Config.
Note: The settings for Auth Type, EAP Type and Encryption depend on the security type chosen.
Setting Default
Profile Default
SSID Blank
Client Name Blank
Power Save Fast
Tx Power Maximum
Bit Rate Auto
Radio Mode See Profile Parameters (page 11-10) for default
Auth Type Open
EAP Type None
Encryption None
To Next Page
Loading...
