2 - 24
Startup Help
Issue:
Can’t change the date/time or adjust the volume.
Solution:
AppLock is installed and may be running in User Mode on the MX7 Tecton. AppLock user mode restricts access to the con-
trol panels.
Issue:
Touch screen is not accepting stylus taps or needs recalibration.
Solution:
If the touch screen is not accepting stylus taps, press Ctrl+Esc (Blue+Alt) to force the Start Menu to appear. Use the arrow
keys to move from program to program. Press Enter to open folders or start a program e.g., Registry panel Warmboot but-
ton.
Issue:
The MX7 Tecton seems to lockup as soon as it is rebooted.
Solution:
There may be slight delays while the wireless clients connect to the network, authorization for voice-enabled applications
complete, Wavelink Avalanche management of the MX7 Tecton startup completes, and Bluetooth relationships establish or
re-establish. When the desktop appears or an application begins, the MX7 Tecton is ready for use.
Issue:
New MX7 Tecton main batteries don't last more than a few hours.
Solution:
New batteries must be fully charged prior to first use. Li-Ion batteries (like all batteries) gradually lose their capacity over
time (in a linear fashion) and never just stop working. This is important to remember – the MX7 Tecton is always ‘on’ even
when in the Suspend state and draws a small amount of battery power at all times.
Cold Storage Battery Life – minimum 2.5 hours while the unit is roaming, powered on with ambient temperature -10°C
(14°F) or above, display backlight turned on, keypad LED backlight on, radio connected to Access Point, and scanner
decoding bar codes. The Li-Ion main battery (MX7A381BATT, MX7393BATT, and MX7396BATTERY) has been designed
specifically for the Cold Storage device. This 1250mAh battery has a blue label while the standard 2200mAh battery has a
white (MX7A380BATT and MX7392BATT) label.
Issue:
Keep losing ActiveSync connection between my host computer and the MX7 Tecton.
Solution:
Disconnect the USB cable, wait 1-2 seconds and reconnect the cable. The MX7 Tecton will not enter Suspend as long as
an ActiveSync session is running. The ActiveSync session prevents it from going into suspend.
To Next Page
Loading...
