Name: Honeywell MX7 Tecton
Brand: Honeywell
Rating: 5 (1 reviews)

To Next Page

To Previous Page

13 - 8

Charger Cleaning, Storage and Service

Cleaning

Unplug the charger from the power source before cleaning or removing debris from charging pockets.

Use only mild detergent with a slightly damp cloth to clean the outside of the charger. Do not use solvents or flammable

cleaners. Allow the case to dry fully before using again.

Do not allow cleaning agents of any kind to contact the charging contacts; they may be damaged. If necessary, clean them

with a soft-bristle, dry brush or compressed air.

Storage

Remove all batteries from the charging bays and disconnect AC power before placing the charger in storage. It should be

stored in a cool, dry place, protected from weather and airborne debris.

Battery packs should be kept in a cool, dry place whenever possible. Do not store battery packs in direct sunlight, on a

metal surface, or anywhere the battery pack cannot cool down. Do not leave the battery pack in a non-operating charger.

The battery pack may discharge through the charger rather than hold its charge.

Service

There are no user serviceable parts in the rechargeable Lithium Ion battery or the charger. Contact Technical Assistance

(page 16-1) should your charger require service.

LED is flashing RED at any

pocket.

The battery pack voltage has not

reached 6.0V within 30 minutes and

the charger has timed out.

Contact Technical Assistance (page 16-1) for battery

pack replacement options.

Solid YELLOW / AMBER LED

when battery pack is inserted

in the charging pocket.

The battery pack is too hot or too

cold to charge.

Remove battery pack from the charging pocket and allow

it to adjust to room temperature.

Note: If the battery pack is left in the charging pocket, it

will cool down or warm to a temperature upon

which the charger will begin the charge cycle.

However, depending on the temperature of the

battery, it may take 2-3 hours to adjust. The cool-

down / warm-up of a battery pack is much quicker

if the battery is not in the charging pocket.

Problem Cause Solution

Honeywell MX7 Tecton Specifications

General

Display diagonal	3.5 \
Display resolution	240 x 320 pixels
Display number of colors	-
Internal memory	0.256 GB
Internal memory type	RAM
Compatible memory cards	SD
Maximum memory card size	4 GB
Processor family	PXA 320
Processor frequency	0.806 GHz
GPS (satellite)	No
Operating system installed	Windows CE 6.0
Wi-Fi standards	802.11a, 802.11b, 802.11g
Bluetooth version	2.0+EDR
Headphone outputs	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	-30 - 50 °C
Operating relative humidity (H-H)	5 - 100 %
Battery capacity	2200 mAh
AC adapter output current	7.4 A
Product color	Black, Blue
Keyboard layout	Alphanumeric
Linear (1D) barcodes supported	Codabar, Code 128, Code 39, Code 93, EAN-13, GS1-128 (UCC/EAN-128), PLANET, Plessey, Telepen, Trioptic, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Code 49, Data Matrix, MaxiCode, MicroPDF417, PDF417, QR Code