10 - 5
File Menu Options
Connect
The Connect option under the File menu allows the user to initiate a manual connection to the Mobile Device Server.
The connection methods, by default, are wireless and COM connections. Any updates available will be applied to the
MX7 Tecton immediately upon a successful connection.
Scan Config
The Scan Configuration feature is not supported. The Scan Config option under the File menu allows the user to con-
figure Enabler settings using a special bar code that can be created using the Avalanche MC Console utilities. Refer to
the Wavelink Avalanche Mobility Center User Guide for details.
Settings
The Settings option under the File menu allows the MX7 Tecton user to access the control panel to locally configure
the Enabler settings. The Enabler control panel is, by default, password protected.
The default Settings password is system. The password is not case-sensitive.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
