9 - 5
Parameters are separated by a single comma. If a parameter requires a comma within it, the whole parameter must be
enclosed in quote marks ("). Extra spaces are ignored between the comma and the next parameter.
For Example
To delete a file called Ive, got, commas, in, my, name.txt, use the command
delete,"Ive, got, commas, in, my, name.txt".
Enclosing quotes are used to allow commas inside a parameter, but are removed prior to executing the command. Thus,
delete,deleteme.txt is the same as delete,“deleteme.txt”. If a parameter requires a quote mark within it, the whole parame-
ter must first be enclosed within quote marks, and the required quote mark is represented by two quote marks (""). For
example, to place the message This is how you display “quote marks” on the screen, use the command
message,This is a heading,"This is how you display ""quote marks""".
The case of a command is ignored, so delete is the same as DELETE and DeLeTe.
Comments
Any line that starts with a semicolon (;), a slash (‘/’) or an asterisk (*) is treated as a comment, and ignored by Launch.
Launch also ignores any extra parameters (more than the required number) in a command. It is not recommended that
comments be placed on the end of lines as any future changes could render your script files incompatible.
Blank lines are also ignored.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
