8 - 19
EAN13 - Advanced Properties
Transmit Check Character – When enabled, transmit the check character. Default is disabled.
Addenda
Read 2-Digit – When enabled, transmit the 2 digit addenda. Default is disabled.
Read 5-Digit – When enable, transmit the 5 digit addenda. Default is disabled.
Required – When enabled, only transmit bar codes with a 2 or 5 digit addenda. Default is disabled.
Insert Separator – When enabled, insert a space between the code and addenda. Default is disabled.
Note: A UPCA decoding algorithm will also decode EAN 13 labels. For correct operation, either disable the UPCA
symbology when using EAN 13 labels or configure the UPCA settings to match the EAN 13 settings.
To Next Page
Loading...
