8 - 26
Telepen - Advanced Properties
Original Output – When enabled, output is Original Telepen. When disabled, output is AIM. Default is enabled.
UPCA- Advanced Properties
Transmit Check Character – When enabled, transmit the check character. Default is enabled
Transmit Number System Digit – When enabled, transmit the number system digit. Default is enabled.
Addenda
Read 2-Digit – When enabled, transmit the 2 digit addenda. Default is disabled.
Read 5-Digit – When enable, transmit the 5 digit addenda. Default is disabled.
Required – When enabled, only transmit bar codes with a 2 or 5 digit addenda. Default is disabled.
To Next Page
Loading...
