Honeywell touchpoint Pro Technical Handbook

NORMAL OPERATION
Part. No. 2400M2501_6 Touchpoint Pro
123 Technical Handbook
mV Channel 3
At least One Alarm
Enabled
Vote Count
Channels Selected:
3
To allow zoning of sensors it is possible to assign as many or as few input channels to the relay output channels as required,
however it is a requirement of the European Performance Approval that at least one channel is configured to latch such a
fault.
1

Honeywell touchpoint Pro Specifications

General

Brand	Honeywell
Model	touchpoint Pro
Category	Control Systems
Language	English