Honeywell touchpoint Pro - TPPR-W PSUs Ordering

TECHNICAL SPECIFICATIONS
Part. No. 2400M2501_6 Touchpoint Pro
168 Technical Handbook
21.3 Floor Standing Enclosures
Ventilated enclosures must only be installed in a place that provides a Pollution Degree 2 environment, e.g. places that
afford protection from rain, snow and direct UV rays (sunlight). Such an environment would include laboratories, offices and
Control rooms.
Non-ventilated (sealed) enclosures can be installed indoors or outdoors in a Pollution Degree 3 environment, but one that
affords total protection from rain, snow and direct UV rays (sunlight).
21.3.1 Floor Standing Enclosures with and without Ventilation
Part Number
TPPR-V-1250
TPPR-V-1260
TPPR-V-1252
TPPR-V-1262
TPPR-V-1254
TPPR-V-1264
Material
No Ventilation
Natural Ventilation
Forced Ventilation
Dimensions (H x W x D)
2000 x 800 x 600 mm
2000 x 800 x 600 mm
2000 x 800 x 600 mm
Weight
201 Kg
201 Kg
201 Kg
Electrical Rating
100 – 240 VAC; 50/60 Hz; 2028 W max or 24 VDC nominal (18 – 32 VDC); 2450 W
max. W max is dependent on module and PSU configuration.
Class
Equipment Class 1 (grounded)
Altitude
2000 m ASL max. in permanently-connected continuous operation.
Pollution Degree
2 (ventilated); 3 (non-ventilated)
Ambient Temperature
-25 °C to +55 °C (Remote version with PSU’s)
Humidity
10 to 90% RH non-condensing (ventilated), 0 to 100% RH condensing (non-ventilated)
Ingress Protection
Type 1 / IP2X (ventilated); Type 4, 12 / IP56 (non-ventilated).
WARNING
Protect from direct exposure to precipitation and sunlight.
AVERTISSEMENT
Protéger des expositions directes au soleil et de la pluie.