ILLUSTRATIONS
Part. No. 2400M2501_6 Touchpoint Pro
188 Technical Handbook
26 List of Illustrations
Figure 1. Electrical Warning Label 1 8
Figure 2. Electrical Warning Label 2 8
Figure 3. Protective Earth (Ground) Point 8
Figure 4. Equipment Earth (Ground) Point 8
Figure 5. Controller Rear Cover with Example Labels 8
Figure 6. Example of a Typical System Rating Label 9
Figure 7. Typical TPPR Product Label 9
Figure 8. Keep Children Away 10
Figure 9. No Naked Flames 10
Figure 10. Use Caution 10
Figure 11. Electrical Hazard 10
Figure 12. Read The Instruction Manual 10
Figure 13. Wear Eye Protection 10
Figure 14. Hazardous Waste (Pb = Lead) 10
Figure 15. Recycle Only 10
Figure 16. TPPR Building Blocks 12
Figure 17. TPPR Controller with Remote Units and Field Devices 13
Figure 18. TPPR Enclosures 14
Figure 19. TPPR Controller Cover with Connection Map 14
Figure 20. TPPR Controller 16
Figure 21. TPPR Backplane 17
Figure 22. TPPR Controller Typical Schematic 17
Figure 23. Ring Circuit With All Modules Working 18
Figure 24. Ring Circuit With a Failed Module 18
Figure 25. TPPR Module Types 19
Figure 26. Typical Power Supply Setup 20
Figure 27. Choice of PSU Size (120 W / 240 W / 480 W) 20
Figure 28. Power Redundancy Module Operation 21
Figure 29. DC-UPS and Battery Configuration 22
Figure 30. Battery Circuit 24
Figure 31. TPPR Correct Enclosure Mounting Orientation 26
Figure 32. Small Wall Mounted Enclosure 27
Figure 33. Medium Wall Mounted Enclosure 27
Figure 34. Large Wall Mounted Enclosure 27
Figure 35. Hazardous Area Wall Mounted Enclosure 28
Figure 36. Example of a Floor Mounted System with Forced Rear Ventilation and Vent Hood 29
Figure 37. TPPR 19" Rack Dimensions 29
Figure 38. TPPR Panel Mount Dimensions 30
Figure 39. TPPR Bezel Mounting Kit 30
Figure 40. TPPR Battery Enclosure Dimensions 32
Figure 41. Ring Network Maximum Distances 35
To Next Page
Loading...
