Honeywell touchpoint Pro - Gas Range Fault Settings; Calibration Reminder Settings

TABLES
Part. No. 2400M2501_6 Touchpoint Pro
191 Technical Handbook
27 List of Tables
Table 1. TPPR Access Levels 11
Table 2. TPPR Module Types 19
Table 3. PSU Terminal Allocation 21
Table 4. DC-UPS Primary Terminal Allocation 22
Table 5. DC-UPS Secondary Terminal Allocation 22
Table 6. DC-UPS LED Meanings 23
Table 7. Backup Battery Details 23
Table 8. Approximate Wall Mounted Enclosure Weights 26
Table 9. AIM mA Connection Table 40
Table 10. AIM mV Connection Table 42
Table 11. IM Connection Table 43
Table 12. ROM Connection Table (Unpowered) 44
Table 13. RCM Connection Table 45
Table 14. Communications Ring Cable 47
Table 15. System State Relay Connections 48
Table 16. PSU Input Connections 48
Table 17. Modbus Parameter Settings 96
Table 18. Modbus Input Channels 96
Table 19. Modbus Output Channels 96
Table 20. Modbus System Summary 97
Table 21. Modbus System Summary Continued 97
Table 22. Modbus System Summary Continued 97
Table 23. Modbus Channel Analogue Values 97
Table 24. Modbus Channel Analogue Values (Float) 97
Table 25. Modbus Channel Animation Register 98
Table 26. Modbus Channel Animation Register Continued 98
Table 27. Query Poll Register 99
Table 28. Query Poll Register Values 99
Table 29. Query Poll Descriptions 99
Table 30. Query Poll Types 99
Table 31. Query Poll Example 100
Table 32. Command Poll Registers 100
Table 33. Command Poll Register Values 100
Table 34. Command Types 100
Table 35. Command Type Example 101
Table 36. Modbus Exception Responses 101
Table 37. System Alert Icons 108
Table 38. Input Channel Menu Options 112
Table 39. Inhibit / Force Options 114
Table 40. System State Relay Operation 117