EasyManuals Logo

Honeywell touchpoint Pro Technical Handbook

Honeywell touchpoint Pro
200 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #185 background imageLoading...
Page #185 background image
CERTIFICATION
Part. No. 2400M2501_6 Touchpoint Pro
178 Technical Handbook
22.3 National and International Certificates for Zone 2 Div. 2
The TPPR Zone 2 Div. 2 Systems and System Components hold the following National and International Certificates and
Certification Codes:
Description
Certificates
Remote Wall Mount Zone 2/Div. 2 Enclosure and ROM (ATEX/IECEx)
II 3G Ex nA nC IIC T4 Gc
(ROM) Tamb –40 °C to +70 °C
(Enclosure) Tamb –40 °C to +xx °C*
* See Rating Plate
Remote Wall Mount Zone 2/Div. 2 Enclosure and ROM (CSA US/CAN)
Class I, Div. 2, ABCD T4
Class I, Zone 2, AEx nA nC IIC T4
Class I, Zone 2, Ex nA nC IIC T4
(ROM) Tamb –40 °C to +70 °C
(Enclosure) Tamb –40 °C to +xx °C*
* See Rating Plate
AIM mA, AIM mV, DIM, RCM and Backplanes (ATEX/IECEx)
II 3G Ex nA IIC T4 Gc
Tamb –40 °C to +70 °C
AIM mA, AIM mV, DIM, RCM and Backplanes (CSA US/CAN)
Class I, Div. 2, ABCD T4
Class I, Zone 2, AEx nA IIC T4
Class I, Zone 2, Ex nA IIC T4
Tamb –40 °C to +70 °C
Remote Wall Mounted Zone 2/Div. 2 Enclosure
SIRA 15ATEX4034X
IECEx SIR15.0021X
CSA 70030437
AIM mA
SIRA 15ATEX4028U
IECEx SIR15.0015U
CSA 70004992
AIM mV
SIRA 15ATEX4029U
IECEx SIR15.0016U
CSA 70025468
DIM
SIRA 15ATEX4030U
IECEx SIR15.0017U
CSA 70025478
ROM
SIRA 15ATEX4031U
IECEx SIR15.0018U
CSA 70025950
RCM
SIRA 15ATEX4032U
IECEx SIR15.0019U
CSA 70025951
Backplanes
SIRA 15ATEX4033U
IECEx SIR15.0020U
CSA 70025953
Table 48. National and International Certificates
22.4 European Performance Approval (DEKRA Exam) for Systems
TPPR has been approved by DEKRA Exam for use in the measurement of oxygen as well as combustible and toxic gases.
The certification marking that is applied to the product is shown below:
Ex II (1) GD
BVS 16 ATEX G 002 X for EN 60079-29-1, EN 50104 and EN 50271
PFG 16 G 002 X for EN 50104, EN 45544-1/2/3 and EN50271

Table of Contents

Other manuals for Honeywell touchpoint Pro

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell touchpoint Pro and is the answer not in the manual?

Honeywell touchpoint Pro Specifications

General IconGeneral
BrandHoneywell
Modeltouchpoint Pro
CategoryControl Systems
LanguageEnglish

Related product manuals