CERTIFICATION
Part. No. 2400M2501_6 Touchpoint Pro
179 Technical Handbook
22.4.1 Approved Components
The following system components have been tested and approved by DEKRA Exam
CCB & CCB-R TPPR-V-2120
COB TPPR-P-2110
Local HMI TPPR-V-0852
CM Motherboard TPPR-P-2100
Bus Interface Board TPPR-V-2130
Backplane 10 Way TPPR-P-0540
Backplane 9 Way TPPR-P-0530
Backplane 7 Way TPPR-P-0525
Backplane 5 Way TPPR-P-0520
19” Rack (with HMI) TPPR-V-0602
19” Rack (remote) TPPR-V-0612
Wall Mount Remote (Small) TPPR-V-1215
AIM mA TPPR-V-1000
AIM mV TPPR-V-1010
DIM TPPR-V-1030
ROM TPPR-V-1040
RCM TPPR-V-1050
Note: The PC configuration software has not been assessed by DEKRA Exam. If this software is used to configure the
TPPR system the configuration must be verified before use, for example by confirming the printed system configuration and
channel configuration reports.
Note: The power supply units have not been assessed by DEKRA Exam. Any suitable power supply may be used.
To Next Page
Loading...
