SAFETY
Part. No. 2400M2501_6 Touchpoint Pro
9 Technical Handbook
2.2.2 Equipment Rating Labels (Hazardous Locations)
The following labels are fixed in prominent positions on the enclosure and on relevant modules. It is the user’s responsibility
to check individual rating plates before installation and to ensure that specifications are not exceeded during operation.
Exceeding the approved ratings invalidates product certification and the manufacturers’ warranties.
Some controllers may not have the label shown in Figure 6, but will have a label similar to the one in Figure 7.
Limits for Voltage / Power / T
amb
CE Mark and Notified Body for
Production Supervision
SIRA ATEX / IECEx Certificate
Numbers
ATEX / IECEx Hazardous Area
Certification Details
US/Canadian Hazardous Location
and Zone Certification Details
CSA Monogram Canada and USA
Certified
Manufacturer’s Master Contract
Number and Canadian / US
Performance Identification
Figure 6. Example of a Typical System Rating Label
Note: The CE mark and Notified Body number 0518 shown on product labels does not apply to Type ‘n’ approval.
Figure 7. Typical TPPR Product Label
Note: Similar labels appear on the Modules and the Backplanes.
To Next Page
Loading...
Need help?
General
