INTRODUCTION
Part. No. 2400M2501_6 Touchpoint Pro
16 Technical Handbook
3.3.8 Licences
The TPPR controller software does not require a licence.
Please contact your local Honeywell supplier or distributor to obtain licences for the optional PC Configuration and
Webserver options.
Refer to the PC Configuration or Webserver User Guides for details on installing and managing licences.
TPPR will notify you shortly before the expiry of your current PC Configuration or Webserver licence. Licence expiry does
not affect local operation using the local controller’s interface.
3.3.9 TPPR Controller Hardware
Internally the Controller houses the Control Centre Board (CCB) and the Communications Board (COB). It also contains an
SD Card slot, USB ports and an Ethernet / Printer port.
The CCB handles all functions related to the safety system operation, the Ring network, the LED indicators and buttons on
the front panel, and the master system state relays. An optional backup CCB is available for multiple redundancy
specifications.
The COB handles the remaining user interfaces – Touchscreen, SD, USB and the Ethernet and Modbus ports.
The Communication Board is completely independent from the Safety Function of the system.
Figure 20. TPPR Controller
Always follow the correct procedure to remove/suspend/reinstall a licence if your system software or firmware is
going to be updated or repaired. Full details are contained in the PC Configuration and Webserver User Manuals.
To Next Page
Loading...
Need help?
General
