Honeywell touchpoint Pro - Appendix 2 - Configurable Parameter Reference Guide; Analogue Input Module 4-20 mA Configuration; Commission Analogue Input Channel; Analogue Input Field Device Selection

SAFE DISPOSAL
Part. No. 2400M2501_6 Touchpoint Pro
185 Technical Handbook
24.3.5 TPPR Power Supply Units
 Casing – Back case: Aluminium; Top case (with mesh): Steel with Nickel plating
 Contents – printed circuit boards (PCB)
24.3.6 TPPR Ring Coupling Module
 Casing – Polyamide PA 6.6 V0 (UL94), green
 Contents – printed circuit boards (PCB)
24.3.7 TPPR Backplanes
 Backplane Assemblies (i.e. PCB)
24.3.8 TPPR Packaging
TPPR outer packaging will be cardboard for wall-mounted units and ISPM15 certified 19 mm solid (not machined) woods for
floor standing units. Facilities for recycling are widely available.
TPPR wall-mounted enclosure inner packaging is made from Stratocell
®
foam. The foam can be recycled and reused as
Stratocell
®
where such recycling facilities exist.
TPPR floor standing units may be shipped on ISPM15 certified wooden pallets that may be reused, recycled or returned.
Figure 106. ISPM15 Pallet Mark Example