Function Parameter Index Reference
50 RS232 Communications Reference Manual 8/99
BAD_BLOCK 18 BOOL O R ON = one or more blocks have bad status
RUNMODE 20 BOOL C R ON = run mode is active
PRGMODE 21 BOOL C R ON = program mode is active
MIN_PER_TICK 26 REAL C R minutes per OS tick
CODE_REV 28 REAL C R code revision number
REALTIME_OFF 30 REAL O R Number of seconds the controller was powered down.*
*Valid for only control block execution cycle after power-up.
Static Configuration Parameters
: None.
To Next Page
Loading...
