HP 1910 User Manual

183
Figure 170 Configuring voice VLAN on GigabitEthernet 1/0/1
5. Add OUI addresses to the OUI list:
a. Click the OUI Add tab.
b. Enter OUI address 0011-2200-0000.
c. Select FFFF-FF00-0000 as the mask.
d. Enter description string test.
e. Click Apply.
Figure 171 Adding OUI addresses to the OUI list
Verifying the configuration
1. When the preceding configurations are complete, the OUI Summary tab is displayed by default,
as shown in Figure 172. You
can view the information about the newly-added OUI address.

HP 1910 Specifications

General

Model	HP 1910
Category	Switch
Port Type	10/100/1000BASE-T
Layer	Layer 2
PoE Support	No
MAC Address Table Size	8K entries
VLAN Support	Yes
Management	Web-based GUI
Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Jumbo Frame Support	Yes
Ports	24