HP 1910 User Manual

11
Function menu Descri
p
tion
User level
Restore
Upload the configuration file to be used at the next
startup from the host of the current user to the
device.
Management
Save
Save the current configuration to the configuration
file to be used at the next startup.
Configure
Initialize Restore the factory default settings. Configure
File
Manageme
nt
File
Management
Manage files on the device, such as displaying the
file list, downloading a file, uploading a file, and
removing a file.
Management
Port
Manageme
nt
Summary Display port information by features. Monitor
Detail Display feature information by ports. Monitor
Setup
Create, modify, delete, and enable/disable a port,
and clear port statistics.
Configure
Port
Mirroring
Summary
Display the configuration information about a port
mirroring group.
Monitor
Create Create a port mirroring group. Configure
Remove Remove a port mirroring group. Configure
Modify Port Configure ports for a mirroring group. Configure
Users
Summary
Display the brief information about FTP and Telnet
users.
Monitor
Super
Password
Configure a password for a lower-level user to
switch from the current access level to the
management level.
Management
Create Create an FTP or Telnet user. Management
Modify Modify FTP or Telnet user information. Management
Remove Remove an FTP or a Telnet user. Management
Switch To
Management
Switch the current user level to the management
level.
Visitor
Loopback Loopback Perform loopback tests on Ethernet interfaces. Configure
VCT VCT
Check the status of the cables connected to Ethernet
ports.
Configure
Flow
Interval
Port Traffic
Statistics
Display the average rate at which the interface
receives and sends packets within a specified time
interval.
Monitor
Interval
Configuration
Set an interval for collecting traffic statistics on
interfaces.
Configure
Storm
Constrain
Storm
Constrain
Display and set the interval for collecting storm
constrain statistics.
Display, create, modify, and remove the port traffic
threshold.
Configure
RMON Statistics
Display, create, modify, and clear RMON
statistics.
Configure

HP 1910 Specifications

General

Model	HP 1910
Category	Switch
Port Type	10/100/1000BASE-T
Layer	Layer 2
PoE Support	No
MAC Address Table Size	8K entries
VLAN Support	Yes
Management	Web-based GUI
Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Jumbo Frame Support	Yes
Ports	24