HP 1910 User Manual

12
Function menu Descri
p
tion
User level
History
Display, create, modify, and clear RMON history
sampling information.
Configure
Alarm Display, create, modify, and clear alarm entries. Configure
Event Display, create, modify, and clear event entries. Configure
Log Display log information about RMON events. Configure
Energy
Saving
Energy Saving
Display and configure the energy saving settings of
an interface.
Configure
SNMP
Setup
Display and refresh SNMP configuration and
statistics information.
Monitor
Configure SNMP. Configure
Community
Display SNMP community information. Monitor
Create, modify, and delete an SNMP community. Configure
Group
Display SNMP group information. Monitor
Create, modify, and delete an SNMP group. Configure
User
Display SNMP user information. Monitor
Create, modify, and delete an SNMP user. Configure
Trap
Display the status of the SNMP trap function and
information about target hosts.
Monitor
Enable or disable the SNMP trap function; create,
modify, and delete a target host.
Configure
View
Display SNMP view information. Monitor
Create, modify, and delete an SNMP view. Configure
Interface
Statistics
Interface
Statistics
Display and clear the statistics information about
an interface.
Configure
Net
k
VLAN Select VLAN Select a VLAN range. Monitor

HP 1910 Specifications

General

Model	HP 1910
Category	Switch
Port Type	10/100/1000BASE-T
Layer	Layer 2
PoE Support	No
MAC Address Table Size	8K entries
VLAN Support	Yes
Management	Web-based GUI
Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Jumbo Frame Support	Yes
Ports	24