HP 1910 User Manual

13
Function menu Descri
p
tion
User level
Create Create VLANs. Configure
Port Detail Display the VLAN-related details of a port. Monitor
Detail
Display the member port information about a
VLAN.
Monitor
Modify VLAN
Modify the description and member ports of a
VLAN.
Configure
Modify Port Change the VLAN to which a port belongs. Configure
Remove Remove VLANs. Configure
VLAN
Interface
Summary
Display information about VLAN interfaces by
address type.
Monitor
Create
Create VLAN interfaces and configure IP addresses
for them.
Configure
Modify
Modify the IP addresses and status of VLAN
interfaces.
Configure
Remove Remove VLAN interfaces. Configure
Voice VLAN
Summary
Display voice VLAN information globally or on a
port.
Monitor
Setup Configure the global voice VLAN. Configure
Port Setup Configure a voice VLAN on a port. Configure
OUI Summary
Display the addresses of the OUIs that can be
identified by voice VLAN.
Monitor
OUI Add
Add the address of an OUI that can be identified
by voice VLAN.
Configure
OUI Remove
Remove the address of an OUI that can be
identified by voice VLAN.
Configure
MAC
MAC
Display MAC address information. Monitor
Create and remove MAC addresses. Configure
Setup Display and configure MAC address aging time. Configure
MSTP
Region
Display information about MST regions. Monitor
Modify MST regions. Configure
Global Set global MSTP parameters. Configure
Port Summary Display the MSTP information about ports. Monitor
Port Setup Set MSTP parameters on ports. Configure
Link
Aggregatio
n
Summary
Display information about link aggregation
groups.
Monitor
Create Create link aggregation groups. Configure
Modify Modify link aggregation groups. Configure
Remove Remove link aggregation groups. Configure

HP 1910 Specifications

General

Model	HP 1910
Category	Switch
Port Type	10/100/1000BASE-T
Layer	Layer 2
PoE Support	No
MAC Address Table Size	8K entries
VLAN Support	Yes
Management	Web-based GUI
Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Jumbo Frame Support	Yes
Ports	24