HP 1910 User Manual

14
Function menu Descri
p
tion
User level
LACP
Summary
Display information about LACP-enabled ports and
their partner ports.
Monitor
Setup Set LACP priorities. Configure
LLDP
Port Setup
Display the LLDP configuration information, local
information, neighbor information, statistics
information, and status information about a port.
Monitor
Modify LLDP configuration on a port. Configure
Global Setup
Display global LLDP configuration information. Monitor
Configure global LLDP parameters. Configure
Global
Summary
Display global LLDP local information and statistics. Monitor
Neighbor
Summary
Display global LLDP neighbor information. Monitor
ARP
Manageme
nt
ARP Table
Display ARP table information. Monitor
Add, modify, and remove ARP entries. Configure
Gratuitous ARP
Display the configuration information about
gratuitous ARP.
Monitor
Configure gratuitous ARP. Configure
ARP
Anti-Attack
ARP Detection
Display ARP detection configuration information. Monitor
Configure ARP detection. Configure
IGMP
Snooping
Basic
Display global IGMP snooping configuration
information or the IGMP snooping configuration
information in a VLAN, and the IGMP snooping
multicast entry information.
Monitor
Configure IGMP snooping globally or in a VLAN. Configure
Advanced
Display the IGMP snooping configuration
information on a port.
Monitor
Configure IGMP snooping on a port. Configure
MLD
Snooping
Basic
Display global MLD snooping configuration
information or the MLD snooping configuration
information in a VLAN, and the MLD snooping
multicast entry information.
Monitor
Configure MLD snooping globally or in a VLAN. Configure
Advanced
Display the MLD snooping configuration
information on a port.
Monitor
Configure MLD snooping on a port. Configure
IPv4 Routing
Summary Display the IPv4 active route table. Monitor
Create Create an IPv4 static route. Configure
Remove Delete the selected IPv4 static routes. Configure
IPv6 Routing
Summary Display the IPv6 active route table. Monitor
Create Create an IPv6 static route. Configure

HP 1910 Specifications

General

Model	HP 1910
Category	Switch
Port Type	10/100/1000BASE-T
Layer	Layer 2
PoE Support	No
MAC Address Table Size	8K entries
VLAN Support	Yes
Management	Web-based GUI
Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Jumbo Frame Support	Yes
Ports	24