HP 1910 User Manual

387
Figure 362 Configuring an ISP domain
5. Configure the ISP domain to use local authentication:
a. Select Authentication > AAA from the navigation tree.
b. Click the Authentication tab.
c. Select the domain test.
d. Select Login AuthN and select the authentication method Local.
Figure 363 Configuring the ISP domain to use local authentication
e. Click Apply.
A configuration progress dialog box appears, as shown in Figure 364.
f. A
fter the configuration process is complete, click Close.

HP 1910 Specifications

General

Model	HP 1910
Category	Switch
Port Type	10/100/1000BASE-T
Layer	Layer 2
PoE Support	No
MAC Address Table Size	8K entries
VLAN Support	Yes
Management	Web-based GUI
Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Jumbo Frame Support	Yes
Ports	24