5. To get the vendor-specific value of a switch, go to the switch console and enter:
switch# show dhcp client vendor-specific
6. The following is the sample command output: Processing of Vendor Specific Configuration is enabled.
Vendor Class Id = J9729A 2920-24G-PoE+ Switch dslforum.org
7. From the New Class window, enter the desired Display name (any) and the Description (any). For the
ASCII field, enter the exact value that you got by executing the show command performed in the previous
step. In this example, Hewlett Packard Enterprise J9729A 2920-24G-PoE+ Switch dslforum.org.
304 Aruba 2930F / 2930M Management and Configuration Guide
for ArubaOS-Switch 16.08
To Next Page
Loading...
