HPE FlexNetwork MSR Series Comware 5 Security Configuration Guide

369
A confirmation dialog box appears.
e. Click Yes and enter the name of the file for saving the key (private.ppk in this example).
f. Transmit the public key file to the server through FTP or TFTP. (Details not shown.)
2. Configure the Stelnet server:
# Generate the RSA key pairs.
<Router> system-view
[Router] public-key local create rsa
The range of public key size is (512 ~ 2048).
NOTES: If the key modulus is greater than 512,
It will take a few minutes.
Press CTRL+C to abort.
Input the bits of the modulus[default = 1024]:
Generating Keys...
++++++++
++++++++++++++
+++++
++++++++
# Generate a DSA key pair.
[Router] public-key local create dsa
The range of public key size is (512 ~ 2048).
NOTES: If the key modulus is greater than 512,
It will take a few minutes.
Press CTRL+C to abort.
Input the bits of the modulus[default = 1024]:
Generating Keys...
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++
# Enable the SSH server function.
[Router] ssh server enable
# Configure an IP address for interface Ethernet 1/1. The Stelnet client uses this address as the
destination for SSH connection.
[Router] interface ethernet 1/1
[Router-Ethernet1/1] ip address 192.168.1.40 255.255.255.0
[Router-Ethernet1/1] quit
# Set the authentication mode for the user interfaces to AAA.
[Router] user-interface vty 0 4
[Router-ui-vty0-4] authentication-mode scheme
# Enable the user interfaces to support SSH.
[Router-ui-vty0-4] protocol inbound ssh
[Router-ui-vty0-4] quit
# Import the client's public key from file key.pub and name it ClientKey.
[Router] public-key peer ClientKey import sshkey key.pub
# Create an SSH user client002 with the authentication method publickey, and assign the
public key ClientKey to the user.
[Router] ssh user client002 service-type stelnet authentication-type publickey assign
publickey ClientKey
3. Establish a connection to the Stelnet server:
a. Launch PuTTY.exe on the Stelnet client to enter the following interface.

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English